-
- Length: 38mm
- Gauge: 16
- Finish: Stainless Steel
- Nail Type: Angled
- Supplied With Gas
- Suitable for use in cordless & pneumatic second fix brad nailers.
- T Head to give concealed fixings. Ideal for internal applications.
- Shank Design: Low penetration resistance in to all materials.
- Diamond Point for maximum penetration.
- Manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers.
- Stainless steel must be used where there is a corrosive environment and/or where the base material has inherent corrosive characteristics, eg: green oak or cedar.
-
- Length: 38mm
- Gauge: 16
- Finish: Galvanised
- Nail Type: Straight
- Supplied With Gas
- Suitable for use in cordless & pneumatic second fix brad nailers.
- T Head to give concealed fixings. Ideal for internal applications.
- Shank Design: Low penetration resistance in to all materials.
- Diamond Point for maximum penetration.
- Manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers.
-
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for tough metal drilling • Dimensionally precise • Manufactured to DIN338 • 135° Split point
-
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration.
-
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration.
-
A 25 piece set of durable engineering quality drills, will give a consistent rapid performance into all non-alloy materials. Manufactured from a high grade M2 tool steel. The 135° split point prevents the bit from drifting and enables faster penetration.
-
An economic HSS drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration.
-
Mitre superglue is a fast setting (approx 90 seconds) medium to high strength all purpose adhesive. Use mitre bond activator to create an instant bond (approx 10 seconds) when fixing with mitre superglue. Suitable for use on a variety of surfaces such as plastics, PVCu, metal, wood, MDF, leather, rubber, ceramics and much more. • When a rapid bond is required the activator will set the adhesive in seconds • Due to the rapid bonding time this system significantly reduced mitre assembly • Temperature resistant from -55°C to +80°C • Can be used for small gap filling
-
- FirmaHold collated nails are designed for the fixing of timber and timber framing using various proprietary types of pneumatic and cordless application tools
- FirmaHold collated nails are manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers
- Various levels of rust protection to comply with building regulations and meets with all service classes
- Diamond Point for maximum penetration
- 34° collation angle. Clipped head to increase the number of nails per strip and therefore reduce tool loading times
-
For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor and covered outdoor applications • Conforms to Eurocode 5 and Service Class 2 • Ring shank type
-
For use in structural applications using high quality paper collation for reduced nail jams. Rust protection to comply with building regulations and meet with service classes. • 34° collation angle • Diamond point for maximum penetration • Clipped head to increase the number of nails per strip and therefore reduce tool loading times • Suitable for indoor and covered outdoor applications • Conforms to Eurocode 5 and Service Class 2 • Ring shank type
-
- FirmaHold collated nails are designed for the fixing of timber and timber framing using various proprietary types of pneumatic and cordless application tools
- FirmaHold collated nails are manufactured to conform with EN792-13:2000 7.2.1a and comply with the requirements of all major tool manufacturers
- Various levels of rust protection to comply with building regulations and meets with all service classes
- Diamond Point for maximum penetration
- 34° collation angle. Clipped head to increase the number of nails per strip and therefore reduce tool loading times