-
A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. -
A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. • Special nickel chromoly shank • High quality BC20 Tungsten Carbide tip • Cold formed blanks utilised up to 11mm diameter • Fully heat treated to eliminate bending • Twin flute design for increased drilling performance • Shot-peened for increased strength and durability • PGM approved and marked • Large range of sizes to cover most drilling applications, including direct fix anchors -
A selection of quick release Flat Wood drills. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case. • Three point design for faster, cleaner holes • Bright finish • Compound angle, ground recessed cutting edge for superior cutting • 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors -
Rotary rebar cutters are used to drill through in-situ rebar when drilling into concrete when in rotary mode ONLY. Designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M. NOTE: Product not vented • High temperature brazing • Heavy duty Tungsten Carbide tip • Made in USA • FOR ROTARY MODE ONLY -
Rotary rebar cutters are used to drill through in-situ rebar when drilling into concrete when in rotary mode ONLY. Designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M. NOTE: Product not vented • High temperature brazing • Heavy duty Tungsten Carbide tip • Made in USA • FOR ROTARY MODE ONLY -
Holesaw arbors including pilot drill for holesaw diameters 14-30mm.To Fit Holesaw Ø (mm) 14.0 - 30.0 -
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for tough metal drilling • Dimensionally precise • Manufactured to DIN338 • 135° Split point -
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for tough metal drilling • Dimensionally precise • Manufactured to DIN338 • 135° Split point -
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. -
A 25 piece set of durable engineering quality drills, will give a consistent rapid performance into all non-alloy materials. Manufactured from a high grade M2 tool steel. The 135° split point prevents the bit from drifting and enables faster penetration. -
A 25 piece set of durable engineering quality drills, will give a consistent rapid performance into all non-alloy materials. Manufactured from a high grade M2 tool steel. The 135° split point prevents the bit from drifting and enables faster penetration. -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise -
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise
-
Tungsten carbide-tipped, sand-blasted masonry drill bits for concrete, masonry, brick, block and stone, supplied in a handy, soft-grip storage case. Compatible with all 13mm 3-jaw chucks. Includes 3 x 3, 4, 5mm and 2 x 6, 8 and 10mm bits.- Tungsten carbide-tipped, sand-blasted masonry drill bits
- For concrete, masonry, brick, block & stone
- Handy, soft-grip storage case
-
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch.
-
The 3 Pce Step Drill Set is specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood. Manufactured from high speed steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. Set contains: 4-12mm in 2mm increments, five-step drill, 4-22 in 2mm increments, ten-step drill and 4-32mm in 2mm increments. Set is supplied in a robust metal case.- Manufactured from high speed steel for increased durability and cutting power
- Specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood.
- Supplied in robust metal case
-
The HSS 1/4" Hex Shank Step Drill is ideal for precision drilling in aluminium, brass, copper, plastic, steel and wood. Drills holes in 2mm increments from 4 - 22mm. Manufactured from high speed steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. The hex shank enables the step drill to be quickly fitted to any 1/4" power bit adaptor.- Hex shank enables the step drill to be quickly fitted to any 1/4" power bit adaptor
- Specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood
- Titanium nitride coated to reduce friction and heat
- 2mm step increments
