-
A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. -
A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. • Special nickel chromoly shank • High quality BC20 Tungsten Carbide tip • Cold formed blanks utilised up to 11mm diameter • Fully heat treated to eliminate bending • Twin flute design for increased drilling performance • Shot-peened for increased strength and durability • PGM approved and marked • Large range of sizes to cover most drilling applications, including direct fix anchors -
A selection of quick release Flat Wood drills. The quick release feature is designed to ensure a rapid change of bits making it ideal for multiple applications. Sold in a robust weatherproof case. • Three point design for faster, cleaner holes • Bright finish • Compound angle, ground recessed cutting edge for superior cutting • 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors -
Rotary rebar cutters are used to drill through in-situ rebar when drilling into concrete when in rotary mode ONLY. Designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M. NOTE: Product not vented • High temperature brazing • Heavy duty Tungsten Carbide tip • Made in USA • FOR ROTARY MODE ONLY -
Rotary rebar cutters are used to drill through in-situ rebar when drilling into concrete when in rotary mode ONLY. Designed for use in SDS plus hammer machines switched to ROTARY MODE ONLY. Drilling with the hammer action switched on will result in serious damage to the tool. Please read the instructions and use the recommended R.P.M. NOTE: Product not vented • High temperature brazing • Heavy duty Tungsten Carbide tip • Made in USA • FOR ROTARY MODE ONLY -
Holesaw arbors including pilot drill for holesaw diameters 14-30mm.To Fit Holesaw Ø (mm) 14.0 - 30.0 -
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for tough metal drilling • Dimensionally precise • Manufactured to DIN338 • 135° Split point -
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for tough metal drilling • Dimensionally precise • Manufactured to DIN338 • 135° Split point -
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. -
A 25 piece set of durable engineering quality drills, will give a consistent rapid performance into all non-alloy materials. Manufactured from a high grade M2 tool steel. The 135° split point prevents the bit from drifting and enables faster penetration. -
A 25 piece set of durable engineering quality drills, will give a consistent rapid performance into all non-alloy materials. Manufactured from a high grade M2 tool steel. The 135° split point prevents the bit from drifting and enables faster penetration. -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise -
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise
-
Tungsten carbide-tipped, sand-blasted masonry drill bits for concrete, masonry, brick, block and stone, supplied in a handy, soft-grip storage case. Compatible with all 13mm 3-jaw chucks. Includes 3 x 3, 4, 5mm and 2 x 6, 8 and 10mm bits.- Tungsten carbide-tipped, sand-blasted masonry drill bits
- For concrete, masonry, brick, block & stone
- Handy, soft-grip storage case
-
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch.
-
The 3 Pce Step Drill Set is specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood. Manufactured from high speed steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. Set contains: 4-12mm in 2mm increments, five-step drill, 4-22 in 2mm increments, ten-step drill and 4-32mm in 2mm increments. Set is supplied in a robust metal case.- Manufactured from high speed steel for increased durability and cutting power
- Specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood.
- Supplied in robust metal case
-
The HSS 1/4" Hex Shank Step Drill is ideal for precision drilling in aluminium, brass, copper, plastic, steel and wood. Drills holes in 2mm increments from 4 - 22mm. Manufactured from high speed steel for increased durability and cutting power. Titanium coated to reduce friction and heat. 2mm step increments. The hex shank enables the step drill to be quickly fitted to any 1/4" power bit adaptor.- Hex shank enables the step drill to be quickly fitted to any 1/4" power bit adaptor
- Specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood
- Titanium nitride coated to reduce friction and heat
- 2mm step increments
-
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. Also removes plaster or rendering. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
A mixed selection of 15 carbide tipped Masonry Drills. The range covers the most popular hole sizes for plastic plugs. Sold in a robust weatherproof case. • 135° high grade industrial carbide tip • Ground flute • Silver and black finish • Heat treated -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch.
-
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. -
A set of high performance drill bits for drilling concrete and masonry. German tested and PGM approved to ensure drilling precision and performance. Contains the sizes used predominantly in plastic plug and masonry fixing applications • Special nickel chromoly shank • High quality BC20 Tungsten Carbide tip • Twin flute design for increased drilling performance • Fully heat treated to eliminate bending • Cold formed blanks utilised up to 11mm diameter • Shot-peened for increased strength and durability -
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength. Irwin Masonry Drill Bit for Cordless Drills. Specifications: Diameter: 6.0mm. Total length: 400mm. Working Length: 300mm. -
Drills pilot, clearance hole and countersink in one operation for the most popular sized screws; 6, 8, 10 and 12 gauge. Includes replaceable HSS drill.- For screws 6, 8, 10 & 12 gauge
- Drills pilot, clearance & countersink in one operation
- Includes replaceable HSS drill
-
- Fully hardened high carbon steel bit
- Precision ground tri-point bit for a clean cut & reduced splintering
- For drilling softwood, medium hardwood, particle board, plasterboard & plastics
-
This durable engineering quality HSS ground drill is designed for drilling sheet metal and wood with a 1/4” hex chuck impact driver. The quick change shank can be rapidly interchanged for easy and hassle free drilling. -
A high performance wood drill for drilling a deep hole into various types of timber. • Hex shank • Bright and black finish • High grade carbon steel • Screw point -
A high performance wood drill for drilling a deep hole into various types of timber. • Hex shank • Bright and black finish • High grade carbon steel • Screw point -
A high performance wood drill for drilling a deep hole into various types of timber. • Hex shank • Bright and black finish • High grade carbon steel • Screw point
-
A high performance wood drill for drilling a deep hole into various types of timber. • Hex shank • Bright and black finish • High grade carbon steel • Screw point
-
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance when drilling larger diameter holes into all non-alloy materials. Can be used in a 1/2" chuck. The 118° split point prevents the bit from drifting. Mainly used for drilling sheet metal. • The 118° split point prevents the bit from drifting • M2 grade HSS (High Speed Steel) with Black Oxide coating • 12.5mm diameter shank • Dimensionally precise • Milled Flute -
- These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
- Tap screws are designed with spiral flutes and the chip clearing process would be better.
- They are thread taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
- These tap drill bits are used on a machine to do the tapping, generally more accurate because human error is eliminated.
-
Ideal for drilling a clean hole into hard materials such as ceramics, porcelain, marble and slate. • Vacuum brazed technology, allows the dry drill bit to be used at a higher temperature to cut through hard porcelain tile • Integrated lubricant, aids cooling and prolongs life • Non-slip hex shank • Laser etched diameter on body for ease of identification • Suitable for dry or wet use -
The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. • Three point design for faster, cleaner holes • Bright finish • Compound angle, ground recessed cutting edge for superior cutting -
The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. • Three point design for faster, cleaner holes • Bright finish • Compound angle, ground recessed cutting edge for superior cutting • 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors
-
A mixed selection of 12 HSS Ground Metal Drills with a 135° degree quick start split point and 5 carbide tipped Masonry Drills. Sold in a robust weatherproof case. Contents: HSS Drill Bits:- 1.5 x 40mm
- 2.0 x 49mm
- 2.5 x 57mm
- 3.0 x 61mm
- 3.2 x 65mm
- 3.5 x 70mm
- 4.0 x 75mm
- 4.5 x 80mm
- 4.8 x 85mm
- 5.0 x 86mm
- 5.5 x 93mm
- 6.0 x 93mm
- 5.0 x 85mm
- 5.5 x 85mm
- 6.0 x 100mm
- 7.0 x 100mm
- 10.0 x 120mm
-
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for particularly tough metal drilling • Manufactured to DIN 338 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch. -
Manufactured from a high quality M35 grade steel. Ideal for drilling holes into stainless steel and other alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • M35 alloyed High Speed Steel (HSS) with 5% Cobalt content • High heat resistance for particularly tough metal drilling • Manufactured to DIN 338 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch. -
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials.• Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 338 • Dimensionally precise -
Manufactured from a high grade M2 tool steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 338 • Dimensionally precise -
For drilling carbon and alloy steel, cast iron, non-ferrous metal and plastics. 135° split point tip from 3mm and above prevents the bit from drifting and enables faster penetration. • Fully ground from solid material • High grade M2 alloyed High Speed Steel (HSS) • Manufactured to DIN 340 • Dimensionally precise • High performance 135° split point tip eradicates the need to pre-drill/centre punch. -
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. • 130° high grade industrial carbide tip • Ground flute • Silver and black finish • Heat treated -
A premium quality masonry bit for use in cordless and corded drill drivers in both rotary and hammer action. • 130° high grade industrial carbide tip • Ground flute • Silver and black finish • Heat treated -
Designed for use in rotation stop hammers with the SDS Plus tool holder system. Breaks up concrete and masonry. Also removes plaster or rendering. NOTE: NOT TO BE USED IN ROTARY MODE. • Heat treated • Shot blast finish for rust protection -
A high performance drill bit with a superior carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. USER CAUTION: Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. • Special nickel chromoly shank • High quality BC20 Tungsten Carbide tip • Cold formed blanks utilised up to 11mm diameter • Fully heat treated to eliminate bending • Twin flute design for increased drilling performance • Shot-peened for increased strength and durability • PGM approved and marked • Large range of sizes to cover most drilling applications, including direct fix anchors
